Tag Archive: costume


IMG_1680I bought the newspaper for the papier-mâché, which was an adventure all on its own due to it being a Sunday and WHERE DO YOU BUY NEWSPAPERS THESE DAYS? A book store seemed logical to me (the bookstore I worked at in a previous life sold newspapers), but that was a big bust and gave me a good reminder of why I hate malls. So, then I thought about the convenience store I worked at in an even earlier life and how it sold newspapers, and that’s when I started hitting the gas stations. That turned out to be the right place , although the line was stupidly long.

After I got home, I tore the newspaper, which was much easier to do than tearing the tissue paper had been. Then I began dipping and placing. At first, I thought I’d hang the wings and paste like that, but the wings weren’t holding their shape well at the time so I laid the wings onto a covered work surface and started. Even this part was more involved than my brain had planned for it to be. I thought I’d be able to get one whole layer of paper done before letting it dry and doing another, smoother layer. WRONG.

IMG_1649Since the wings weren’t holding their shape, I had to reshape them on the table. AND since the wings to which I was pasting paper weren’t solid either, I was basically creating wings around a wire frame the paper stuck to the table. So after one side of one wing was done, I had to hang the wings up to dry, or the side would dry to the table. It took many hours for the one layer to dry completely, and since I was using a flour paste, complete drying was a necessity to prevent mildew.

When I laid the wings down to work on another side the next day, the previously pasted wing had… warped while drying. This goes back to the whole bit about the wings not holding the shape I wanted them to have. I decided I would do one side of the other wing and find a way to prop it away from any surface to which it might stick while it dried. Then I would reshape the warped wing when pasting the other side of it.

IMG_1648OKAY!

I’m just going to short-story it here for you and say that the reshaping didn’t work as great as hoped. THEN, I remembered that this is a costume that will be worn an entire ONE time, and probably not for the whole trickertreating event because my kids shed costumes on Halloween like cats do fur in the summer: just sort of constantly. THEN, I, also, remembered that it’s going to be dark and little details like feathers and slightly warped wings aren’t going to matter. THEN, I, ALSO REMEMBERED that between having to do a quarter of the wings per day and also having to do the ribs along the top of the wings separately, I WAS RUNNING OUT OF TIME.

IMG_1645The ribs took an entire extra day to dry completely. I think this is because the paper tubes got soaked and had to dry, also. When I tried the wings on Pynni, which aren’t at all as heavy as you’d think, the elastic bands from the Wings That Were were not nearly strong enough to hold the New Wings to her back. They just sort of hung down by her side. And this was BEFORE the wings were even painted.IMG_1646

So, while I waited the extra day for the wings to dry, I crocheted a new harness and a new mechanism to hold the new harness on the wings. And I went to the store to buy paint. I had decided after my “this doesn’t have to be perfect” epiphany that I was just going to spray paint the wings grey. At the store, they had “stone” faux finish spray paint. PERFECT!
Then I painted the wings which took more paint than I could have fathomed, but ended up looking like stone anyway.

The final step to all this was to attach the harness and try the wings on Pynni. After some adjusting of the harness and tightening of it against the wings, everything was about as perfect as I was like to get it hours before the trickertreating started.

I have to admit. I wasn’t happy with the wings even after the alterations. They weren’t exactly how I’d pictured them and they didn’t hang on Pynni’s back the way I wanted. I was, actually, very disappointed in them. I felt a little nauseous. I had done all this work, and this one integral part was not right. In the end, when the whole costume was put together, I was happier than I thought I’d be.

And Pynni loved it.

The costuming has been going much slower since the first big push with Pynni’s Weeping Angel dress. Last week, I was able to eek out some time to work on the wig. This was surprising because I was keeping Abshie and Timmus while my brother and his wife were out of town, and they are public school attendees. So here I was, thinking that I would be too busy with my normal schedule plus morning and afternoon carpool topped with homework and extra baths.

All my time concerns were for naught, though, and we were able to keep a tight schedule that allowed for the PS kids to have playtime with the HS kids, and THAT gave me time to work on the wig.

I started out crocheting a beanie with a flap around the ears and back of the head to better mimic Pynni’s natural hair line. Then I created bundles of yarn about 18 to 20 inches long that I tied along the center line of the beanie every two rows or so. This created the center part.

I looped yarn “latch hook” style (a’la amigurumi hair) all along the front, inside edge of the beanie  so that when I pulled the yarn up into the twist, there would be no beanie parts showing. Next I created two, much fatter bundles of yarn of similar length to the attached bundles and braided each of them. One of those braids, I rolled into a disc to attach to the back of the beanie to be the base of the messy bun. The other braid, I glued along the small space between the first bundle of yarn in the front and the amigurumi hairline. The Weeping Angels have some sort of ribbon wrapped around their heads and through their hair, and I thought this would fit the bill while also filling in gaps and covering exposed beanie.

This slideshow requires JavaScript.

I wrapped a styro head with plastic wrap and worked the, now, yarn covered beanie onto it. I couldn’t decide, up until actually getting into the nitty gritty of this part of the project, what I was going to use to secure the yarn down on the wig. Originally, I thought I’d use fabric glue, but that is made to be flexible. I was wanting stiff because this is supposed to be statue-like. So I thought I would use Elmer’s glue. This would dry clear and stiff and, maybe watered down a little, would make a good over-all treatment to make the whole thing stiff. When I started gluing, the Elmer’s glue was a failure. It didn’t dry fast enough to be of use for securing large sections of the wig, so I had to try something else.

I settled on my glue gun and got to work. This worked exactly as I’d hoped, if a little more painfully. Did you know that glue gun glue is HOT? Yeah, me, too, but I burned my poor fingers over and over because yarn hair isn’t very solid and glue oozes easily into the spaces. I tried using tools like popsicle sticks to maneuver the hair around in the glue, but they just stuck to the glue. Whatever. It got done sans a few fingerprints.

Not really, no fingers were permanently damaged in the making of this costume (disclaimer: yet).

I glued down the braided disk and the head band type braid and then, beginning on the left hand side facing me, I began twisting the “hair” along the hairline toward the back and wrapped the “hair” around the braided disc. Along the way, I glued and secured the “hair”, leaving some of it down to create curls along the hairline after the main part of the wig was done. I, then, worked on the right side facing me and repeated the process, making sure the hair was a symmetrical as I could make it.

Then I trimmed the remaining “hair” and wound it into “curls” and glued and pinned them into place. I discovered that Elmer’s glue had it’s uses. In the end, there were ends of yarn that didn’t want to lay flat and weren’t long enough to tuck in anywhere hidden, so I used Elmer’s to glue the ends down and pins to hold them in place while the glue dried.

I also decided to forgo the stiffening of the entire wig. I’m not making the dress stiff so why would I do that to the wig? It doesn’t flow around her shoulders or anything. All the tresses are glued in place so the illusion of stone should hold without any extra gluing.

Things I learned during this process (yay bullet points!):

  • Hot glue is hot. Go figure.
  • Elmer’s glue dries aesthetically better than hot glue. Hot glue is shiny, not matte, this is problematic when imitating stone.
  • I should have used LESS yarn in the bundles that I tied down the center, as the yarn I used was very bulky when all gathered in the back.
  • I should have gathered the hair down one side and then the other BEFORE swirling one side and attaching it to the bun disc in the back. It was difficult to work the second side into the previously glued and dried half done bun and I ended up with WAY too much yarn for the bun in the back.
  • If I’d done the previous bullet point, I could have thinned the yarn out as I worked my way down the sides of the wig OR if I’d done bullet point 3, I might not have had to do even that.
  • I should have found grey yarn to make the beanie out of. I thought the black would be fine if there were gaps in the “hair” yarn, but it’s very visible. Yes, I needed a soft acrylic, but I should have looked harder for something closer to the “hair” color.
Weeping Angel as seen in the Doctor Who episode "The Time of Angels".

Weeping Angel as seen in the Doctor Who episode “The Time of Angels”.

This past holiday season, Pynni got all caught up on her Doctor Who episodes. She was enthralled by the episode The Angels Take Manhattan. As a Doctor Who fan, myself, I find that episode incredibly sad. I won’t post any spoilers here except to say that the bad guys are the Weeping Angels. Hoo-boy. Pynni loves her some Weeping Angels.

So she decides she wants to be a Weeping Angel for next Halloween, read: 2013. I say, “Sure!” Because I like making things, I’m pretty crafty, and I’D APPARENTLY LOST MY EVER-LOVING MIND.

Then, as the year progressed, Pieces says he wants to be The Doctor, but not 11. No, not the most easily identifiable one, what with the bow-tie (Bow-ties are cool!) and the occasional Fez (Fez’s are cool!). Nope, he wants to be 10. Which, let’s face it, 10 may be the best character ever to have graced the small screen, but his Doctor outfit isn’t especially… out-standing. But, whatever, man! I can do that!

Right around that time, Chi says he wants to be a Dalek.

“A Cyberman, you say?” I ask.

“No, a Dalek,” says he.

“Not the 11th Doctor with the bow-tie, which is cool?” says I.

“Ex-ter-min-ate!” he says, in the best robotic imitation.

Work space chaos.

Work space chaos.

Alright! Sure! No problem! I’m making a Weeping Angel and somehow cobbling together a 10th Doctor, in between I can definitely whip up a Dalek!

Right.

So the plan was to start making and make through the spare time I had during the summer. I look back, now and laugh. Spare time?!? HA!!! HAHAHAHAHAHA!!!!!

The fabric I have the most of.

The fabric I have the most of.

About a week ago I started researching the costumes, gathering pictures and ideas and organizing my thoughts on the projects, in general. I realized that the Dalek was going to be a very involved costume if I was going to get Chi to wear it and that coupled with handmaking a Weeping Angel that will please Pynni was stressing me out.

So I got together a lot of pictures of different costume ideas for Chi to peruse, in the hopes that something would strike his fancy. I lucked out and he picked something both inexpensive, and already manufactured. So there’s that.

So now I have a pile of grey fabrics that don’t match because I couldn’t find enough of any one kind of cheap fabric. I’ve researched, measured, and drawn out the yoke that makes up the top of the WA’s dress using one of Pynni’s dresses for a guide. I have a general idea of what I need to do to make the draping of the dress happen.

These WILL be angel wings when I'm done. I think.

These WILL be angel wings when I’m done. I think.

I’ve scavenged a set of luna moth-like wings from Pynni to reform and redress to be statue-like angel wings and I’m digging through the recycling for all those discarded toilet paper rolls to use as the upper spine on the wings. I’m thinking about reshaping the wires of the wings and covering them with papier mache so they won’t be too heavy, but I may just drape them in left over fabric soaked in a stiffener and pin them and allow them to dry. I’m not sure yet.

Also, a wig. Weeping Angels have statue hair. So my plan is to crochet a beanie and then glue yarn to the beanie in the shape of Weeping Angel statue hair.

I just have to keep telling myself that it doesn’t need to be over-the-top as it will probably be worn once, maybe twice, if we go to a Homeschool Halloween party like we did last year.

Speaking of. I better go work on it some.